|
 |
Bentinck Fencing UK are
official suppliers of the full 'metpost' range
of fence supports. |
|
|
|
|
Product List (click for
more info) |
|
|
 |
The Original
METPOST
More info
The original Metpost Post Supports are
designed to allow the erection of fence
posts in minutes without the need for
digging holes or mixing concrete. Drive the
Metpost Post Support into the ground with a
sledge hammer and the 4-fin steel spike will
provide secure anchorage. Two types of post
grip are available, Wedge Grip and System 2
(Click here for more info) Manufactured from
heavy gauge steel, they are available with a
red oxide coating which can be painted to
match your fence or in a galvanised finish.
The Metpost holds fence posts above ground
level to protect against rot and ensure a
long life.
|
| |
|
|
 |
Metpost Bolt - Down
More info
The Metpost Flush
Fitting Bolt Down is ideal where circumstances
dictate that a post should be fixed against a
flush surface, or alternatively mounted onto a
wall. It is particularly suitable for patio
fencing, decking, pergolas, car ports and for
fixing timber fencing to walls.
The Flush Fitting Bolt Down is available to fit
75mm ( 3") and 100mm ( 4") timber posts in both
Wedge Grip and System 2 fixings |
| |
|
|
 |
Metpost Concrete-in
More info
The Metpost
Concrete-In has been designed for use in
hard-standing areas or where ground conditions
prevent the use of Metpost Post Support spikes.
The Metpost Concrete-In is ideal for carports,
pergolas, raised decks and general fencing
applications and is available in a variety of
sizes.
75mm (3") and 100mm (4") sizes with a Wedge Grip
or System 2 fixing both in Red Oxide and
Galvanised finishes. |
| |
|
|
 |
Metpost Repair Spur
More info
The Metpost Repair
Spur is the solution to the problem of rotted
posts which have broken off at ground level but
are in a sound concrete base.
Ideal for repairing gale damaged fencing, the
Repair Spur is available in 75mm (3") and 100mm
(4") sizes with Wedge Grip fixing in Red Oxide
finish |
| |
|
|
 |
Metpost Post Extender
More info
The Metpost Post
Extender enables you to increase the height of
an existing fence. A decorative trellis or panel
can then be easily added.
The sturdy box section utilises the Metpost
Wedge Grip fixing and joins the existing post to
the new post extension firmly and easily.
The long-life brown plastic coating is
specifically designed to blend in with your
existing fencing and give a truly professional
finish. |
|
 |
50mm Spike
More infoThe
50mm ( 2") Metpost Post Support is ideal for
those occasions when a more lightweight solution
is required, for example temporary or light
fencing, but there are many other possible
applications.
The open box construction allows for easy post
removal or replacement if required and it is
ideal for bird tables, composters, signs, rose
arches, wire fences, fruit cages, tree stakes
and sign boards |
| |
|
|
 |
Metclip
Metclips are the
easy way to secure fence panels and heavy duty
trellis to timber posts. They reduce the risk of
damage to fence panels, are available in a
variety of sizes (38mm for heavy duty trellis,
41mm and 52mm for fence panels) and are
galvanised for long life.
PRICE : £0.55 |
| |
|
|
 |
Driving Tool
To ensure easy installation of Metpost Post
Supports it is strongly advised that the Metpost
Driving Tool is used.
The tool protects the Metpost Post Support as
you hammer it in and assists with its correct
alignment.
for 75 x 75 £4.80
for 100 x 100 £6.80 |
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
